FLYDECK
Characteristics
- The FLYDECK system is a patented and certified soffit plane made to simplify, speed up and make the assembly of temporary structures safer.
- You will have a perfectly horizontal plane to work comfortably on any construction site where a suspended solution is needed. Furthermore, with the use of the FLYRAIL beam for mounting the FLYDECK table, you can work without any difficulty and in complete safety.
- With this solution, pillars and pier-caps can be encircled and continued in the next span.
- No limitation in width, length or load capacity. As the system is modular and uses beams and scaffolding decks of any make, model, shape and size.
Advantages
- Significant reduction in set-up times due to the use of the FLYRAIL beam, high manoeuvrability of the elements and connection speed.
- No need to interrupt road or rail routes thanks to the possibility of setting up the FLYDECK plan with FLYRAIL beam from any access point and then continuing in any direction;
- The provisional structure is accessed from a pile or embankment without interrupting road flow;
- Total safety for the workers during the anchorage phases.
- It is always possible to complete the FLYDECK deck with your own railings or any type of scaffolding.
- Considerable fatigue relief for the workers due to the Flyrail beam that supports the weight of the cantilever beams;
- 25 cm aluminium truss with special X-reinforcement for high manoeuvrability and excellent load-bearing capacity;
- Connection of the beams by spigot and special spring pins that make the connection much faster than using screw nuts;
- Laying of safety nets during the creation of the work surface: no need for sub-bridges with a significant reduction in set-up time and overall weight of the structure;
- Economic advantages in transport and handling due to the low weight of aluminium;
- Space reduced by half for storage thanks to the 25 cm beams;
- The FLYRAIL system can also be used with other types of truss.
Technical Data
- Loand capacity up to 150kg/m² with tie-rods every 6m² and loading capacity up to 300kg/m² with tie-rods every 4m²;
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+